Elite Moving & Transportation
|
||
We Offer:
Last Updated: Nov 23, 2024
|
Before actually packing-up, you need to have a game plan. For example:
Pack one room at a time. This will help you when it comes time to unpack. Pack a couple of cartons a day, starting well ahead of the move. Mark all boxes, designating room and box number. Make a carton identification log to show the number of boxes packed per room, and the total number of cartons packed. It's a good idea to leave space in your log for a special comments section to note carton conditions or location of high value goods. Notify your mover of any high value items. Be sure to have plenty of "filling" material available. Be sure that the bottoms of all cartons are secured and will hold the weight of the contents. Packing tape or gummed tape is better than masking tape. Pack heavier items toward the bottom of the box and lighter items toward the top. Try to keep a per-box weight of 50 pounds or less; it makes moving a lot easier. A general rule to remember on carton size --- the heavier the item, the smaller the carton. Packing Dish-ware
Select a medium-sized carton (or mover provided dishpack) and line the bottom of the carton with crumpled packing paper. With packing paper stacked neatly in place on a work table, center one plate on the paper. Grasp a corner on several sheets of packing paper and pull the paper over the plate until sheets completely cover the plate. Stack a second plate on and, moving clockwise, grasp a second corner and pull sheets over the second plate. Stack a third plate. Grasp remaining two corners, folding two sheets of each corner (one at a time) over the plate. Turn your wrapped stack of plates upside down onto your packing paper. Re-wrap the entire bundle: start with one corner of packing paper and pull two sheets over the bundle, cover bundle with next corner, then the third corner; and finally, the fourth. Seal the bundle with packing tape. Place the bundle of dish-ware in a medium-size box so that the plates are standing on edge Use this process on all saucers, bread and butter dishes, and other dishware. When packing smaller dishes, you may choose to stack in greater quantity. Packing Glasses and Stemware
Stuff glasses and stemware with crumpled tissue or packing paper before wrapping. Lay on the corner of packing paper and roll it one or two full rotations (depending on size); pull sides of packing paper up and over glass/stemware and continue rolling to the far corner. Corrugated paper rolls or cellular boxes may be used for added protection. Place glasses and stemware toward the top of your box. Heavier items (dish-ware, pitchers,etc.) should be placed toward the bottom of the box. Delicate glassware and stemware should be placed in an upright position, not on its side.
No matter what you're packing, you should use crumpled packing paper in between each layer to assure a snug fit wherever there's a gap. All boxes with "fragile" items should be marked accordingly.
|